Industrial Nitrogen Oxide Tail Gas Analyzer

• Customization: Available
• Display: Digital
• Portable: Non Portable
• Model NO.: AG-NOx07
• Type: Concentration Meter
• Measurement range: 0-10/100/200/500/1000/2000 mg/m3
• DPI: 0.01
• Resolution: 0.01
• Accuracy: -/+1%
• Measurement time: <5min
• Transport Package: Wooden Box
• Specification: 800mm*400mm*400mm
• Trademark: Twinno
• Origin: Shanghai, China
• HS Code: 9027
• Production Capacity: 100PCS/Month

Product Description

The Nitrogen oxide tail gas analyzer of AG-NOx07







Introduction:

Ag-NOx07 NOx tail gas analyzer is a high-performance and fully functional analysis and treatment system integrating NOx pretreatment, gas sampling, gas concentration analysis and networking module (optional) for boiler flue gas environment.
It is based on the principle of electrochemistry, the monitor can measure NOx concentration quickly and accurately, can detect NOx concentration in real time, and can store emission monitoring data for more than one year. The system includes sampling system, pretreatment system, analysis and temperature, humidity, flow rate, pressure detection and other subsystems.

System composition:

(1)Sampling probe
(2)Heating pipeline
(3)Temperature and Pressure Flow Integrated Machine (Optional)
(4)Pretreatment devices (including cooling, dehumidification, filtration)
(5)Nitrogen oxide gas analyzer
(6)O2 Gas analyzer
(5)Data acquisition and management software
(6)Display and storage systems


Scope of application:

AG-NOx07 nitrogen oxide tail gas analyzer is suitable for the monitoring of nitrogen oxide concentration in the tail gas boiler under 20 tons / hour of steam, low nitrogen combustion retrofit boiler, low nitrogen burner, and VOCs control project tail gas nitrogen oxide monitoring by combustion method.
System characteristics:

(1)The imported electrochemical sensor has high precision, fast response speed and good repeatability;
(2)The analysis process does not require chemical reagents, does not produce secondary pollution, is a non-destructive analysis process;
(3)Three-stage pretreatment unit: condensation, dust removal, drying;
(4)With temperature and humidity compensation algorithm, effectively eliminate the temperature and humidity change interference
(5)There are nitric oxide, nitrogen dioxide, oxygen and other mutual interference compensation;
(6) Using pump suction sampling, it has the function of zero point standard and eliminates drift caused by long-term operation of the system;
(7)7-inch industrial touch screen display with historical data storage and query function;
(8) Instrument with :4-20 mA/RS485 signal output, Ethernet output, relay output and other functions;
(9)For on-site data query, report statistics, data printing and other functions, visual display of gas concentration, type, unit, working status, etc.; data storage time is more than one year and has copy function.



5,Specification:

 System configuration

Nitrogen oxide analyzer parameters

 Detection Principle: Electrochemical Principle

Measuring range:0-10/100/200/500/1000/2000 mg/m3(can be choose), DPI:0.01mg/m3

Precision:≤±2%F.S

Repeatability:≤±1%

Response time: <30S(T90)

Power supply:24VDC

Work pressure:80Kpa-120Kpa;work temperature:-20ºC~+50ºC;

 Working humidity:10%RH ~95%RH,No dew;

 Output signal:RS485,4-20mA

System front-end processing configuration

Metal case,size: almost 800mm*400mm*400mm

Long life sampling pump can work continuously for more than 10000 hours

High precision cooling (compressor dehumidifier), dehumidification, dust filter

Special sampling probe, the sampling pipe adopts special flue gas insulation pipeline, constant temperature and constant pressure control

Electricity leakage switch and 12 V power supply

External box display parameters

Input mode: The Bus-mode RS485 input with RS485 output

Display mode: 7-inch LCD with touch function

Provide on-site data display, data query, report statistics and other functions, visual display of gas concentration, type, unit, working state, etc.

Data storage time is more than one year, and copy function.

After Sales Service

* The warranty period is 12 months from commissioning acceptance date on. In addition, we supply 1 year warranty and lifelong free technical guiding and training.
* We guarantee the maintenance time no more than 7 working days and response time within 3 hour.
* We build instrument service profile for our clients to record the product service and maintenance conditions.
* After instruments start service, we will pay follow-ups to collect the service conditions.


FAQ

What is the mini order quantity?
MOQ: generally 1 unit/piece/set

What payment methods are supported?
Payment method: By T/T, L/C, etc.
Payment terms: Generally, We accept 100% T/T in advance, balance before shipment.

What are the available delivery methods?
Our port location: Shanghai
Delivering to: Worldwide
Delivering method: by sea, by air, by truck, by express, combined transportation

How long is the product date of delivery probably?
Delivery date differs with product type, order quantity, special requirement etc. Usually our big machine delivery date is around 15 ~ 30 days; test equipment or analyzer delivery date is around 3~7 days. Some products have stock, contact us anytime to get more information.

How long is the warranty period?
We warrants the plant supplied under agreed specification against defects in material and workmanship under normal use and service for a period of 1 years after start up of the system.

How is the technical services on the product?
You are welcome to contact us any time if you have any technical question. We will response promptly and answer to your satisfaction. If required and necessary, Engineer available to service and provide technical support for machinery overseas.


Delivery:




Our company: