T6580 Ultrasonic Sludge Interface Meter
Typical applications:
Measurement of sludge interface in sewage treatment sedimentation tank, secondary sedimentation tank and sludge concentration tank;
Sludge level measurement of sedimentation tank in waterworks, water supply plant (sedimentation tank), sand washing plant (sedimentation tank) and electric power (mortar sedimentation tank),etc.
Instrument features:
Continuous measurement, less maintenance
Ultrasonic technology &stable performance
Intelligent menu operation
Data record & curve display
3 relay control switches
High alarm & low alarm, hysteresis control
Multipleoutput modes,4-20mA & RS485.
With password protection to prevent misoperation by non-staff
Technical parameters:
(1)Measurement range:
Sludge level:0.2~12m;
Temperature:0~50.0ºC;
- Temperature compensation:
Automatic compensation;
(3)Resolution:
Sludge level:0.001m;
Temperature:0.1ºC;
(4)Basic error:
Sludge level:±1%F.S;
Temperature:±0.3ºC;
(5)Flow rate:≤3m/S;
(6)Two Current output:
0/4~20mA(Load resistance<750Ω);
(7)Communication output:
RS485 MODBUS RTU;
(8)3 relay control contacts:
5A 250VAC,5A 30VDC;
(9)Power supply(selection):
85~265VAC±10%,50±1Hz,power consumption ≤3W;
9~36VDC,power consumption≤3W;
(10)Dimensions:215×125×80mm;
(11)Installation: Wall mounting;
(13)Waterproof rating:IP65;
(14)Weight:1.5kg;
(15)Working environment:
Operating temperature:-10~60ºC;
Relative humidity: ≤90%;
No strong magnetic field around except the geomagnetic field.
Ultrasonic sludge interface sensor
Measurement method: ultrasonic wave
Shell material: 304/PTFE
Waterproof rating: IP68
Measurement range: 0.2-12m
Measurement blind area: < 20cm
Measurement accuracy: < 0.3%
Ambient temperature: -25 ºC to 80ºC
Cable length: 10 meters cable as standard
When selecting the sensor installation location, the following criteria should be followed:
Keep the sensor perpendicular to the mud surface and the bottom of the pool.
There should be no obstacles in the transmitting range directly below the probe to avoid the ultrasonic signal being blocked and reflected by obstacles.
The probe should be installed away from gas foam and active floating solids caused by sudden flow rate to ensure accurate and stable measurement.
The probe should be installed away from the inlet and outlet.
The sensor probe should be completely submerged in water. If the wall is vertical up and down and the surface is flat, determine the distance from the wall according to the table below.
If the pool wall is uneven, or there are supports, pipes and other objects, it is necessary to increase the distance from the pool wall, in order to avoid the interference caused by the above objects to the measurement.
FAQ:
1.Are you trading company or manufacturer ?
We are factory.We have three Office in Shanghai,Qingdao,Chengdu.
2.How can I choose the suitable one?
Please tell us your detailed requirements by mail or online, we will recommend the suitable one as your request.
3.Does your price is competitive?
We make sure to offer you the best quality with competitive price.
4.What is your terms of payment?
We accept 100% T/T in advance,balance before shipment.
.
5.When I receive it after pay?
Normal models can be delivered with 3-7days,
please contact us to check transport time to your address.
6.How to deliver?
We can send by Express, by Sea and by Air.
7.Is will be broken during transport?
Please do not worry, we do standard export package.
8.What should I do if I do not know how to use?
User manual will be sent together, you can also contact us with more technological support.
Delivery and Packing:
Our company:
Audited Supplier 
){kind=link}