CS6710D Digital Fluoride Ion Selective Sensor
The fluoride ion selective electrode is a selective electrode sensitive to the concentration of fluoride ion, the most common one is the lanthanum fluoride electrode.
Lanthanum fluoride electrode is a sensor made of lanthanum fluoride single crystal doped with europium fluoride with lattice holes as the main material. This crystal film has the characteristics of fluoride ion migration in the lattice holes.
Therefore, it has very good ion conductivity. Using this crystal membrane, the fluoride ion electrode can be made by separating two fluoride ion solutions. The fluoride ion sensor has a selectivity coefficient of 1.
And there is almost no choice of other ions in the solution. The only ion with strong interference is OH-, which will react with lanthanum fluoride and affect the determination of fluoride ions. However, it can be adjusted to determine the sample pH <7 to avoid this interference.
Easy to connect to PLC, DCS, industrial control computers, general purpose controllers, paperless recording instruments or touch screens and other third party devices.
Product advantages:
CS6710D Fluoride Ion sensor is solid membrane ion selective electrodes, used to test fluoride ions in water, which can be fast, simple, accurate and economical;
The design adopts the principle of single-chip solid ion selective electrode, with high measurement accuracy;
PTEE large-scale seepage interface, not easy to block, anti-pollution Suitable for wastewater treatment in the semiconductor industry, photovoltaics, metallurgy, etc. and pollution source discharge monitoring;l
High-quality imported single chip, accurate zero point potential without drift ;l
Model No. |
CS6710D |
Power/Outlet |
9~36VDC/RS485 MODBUS |
Measuring material |
Solid film |
Housing material |
PP |
Waterproof rating |
IP68 |
Measurement range |
0.02~2000mg/L |
Accuracy |
±2.5% |
Pressure range |
≤0.3Mpa |
Temperature compensation |
NTC10K |
Temperature range |
0-80ºC |
Calibration |
Sample calibration, standard liquid calibration |
Connection methods |
4 core cable |
Cable length |
Standard 10m cable or extend to 100m |
Mounting thread |
NPT3/4'' |
Application |
Tap water, industrial water, etc. |
After Sales Service
* The warranty period is 12 months from commissioning acceptance date on. In addition, we supply 1 year warranty and lifelong free technical guiding and training.
* We guarantee the maintenance time no more than 7 working days and response time within 3 hour.
* We build instrument service profile for our clients to record the product service and maintenance conditions.
* After instruments start service, we will pay follow-ups to collect the service conditions.
FAQ
What is the mini order quantity?
MOQ: generally 1 unit/piece/set
What payment methods are supported?
Payment method: By T/T, L/C, etc.
Payment terms: Generally, We accept 100% T/T in advance, balance before shipment.
What are the available delivery methods?
Our port location: Shanghai
Delivering to: Worldwide
Delivering method: by sea, by air, by truck, by express, combined transportation
How long is the product date of delivery probably?
Delivery date differs with product type, order quantity, special requirement etc. Usually our big machine delivery date is around 15 ~ 30 days; test equipment or analyzer delivery date is around 3~7 days. Some products have stock, contact us anytime to get more information.
How long is the warranty period?
We warrants the plant supplied under agreed specification against defects in material and workmanship under normal use and service for a period of 1 years after start up of the system.
How is the technical services on the product?
You are welcome to contact us any time if you have any technical question. We will response promptly and answer to your satisfaction. If required and necessary, Engineer available to service and provide technical support for machinery overseas.
Delivery and Packing:
Our company: